Clipsal Max 4 Link Neutral 13Hole - L13/25
This item is currently available for backorder with an estimated arrival time of 2 days
Please note this ETA is provided to us by our suppliers and could potentially be delayed due to factors outside our control. If there are any delays we will contact you to keep you updated.
Choose your style, Select your Switch and Checkout
We can customise your powerpoint to a range of colours and layouts, suited to your needs.
Clipsal Max 4 Link Neutral 13Hole - L13/25
SKU | CLIL13/25 |
---|---|
Supplier No | L13/25 |
EAN / Barcode | 9318793005807 |
Standards | EN/IEC 62606 |
Width | 31 |
Height | 57.000000 |
Length | 110.000000 |
Width | 63.000000 |
Brand | Clipsal |
Range | Max4 |
Number of Poles | 1 Pole + Neutral |
Voltage | 230/240 V AC 50 Hz conforming to AS/NZS 61009.1 |
Get Max 4 your buck
Complete protection with high performance. With Clipsal Max 4 you will find a range of enclosures, switchboards, residual current devices, miniature circuit breakers, isolators, distribution boards, overvoltage protection and accessories.
A FEW FAQS
The part numbers are L11/25 for the neutral link and L11/25R for the active link.
Yes, we have the L13/25.
No it doesn't come with a back plate. You will need a 413NP. Some of the key features are: For the use of cable ties for cable clamping Not suitable for 414/4P For 410, 413 and 414 products AS3100, AS/NZS3112, AS3109 Certified For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=413NP
Yes the L13/150 will suit those requirements.
Issue: Product Design Feature Product Line: General Duty Safety Switches Environment: Front Covers Cause: Padlocking Resolution: Lock OFF: Provision to padlock the operating handle in the OFF position is standard on all General Duty Safety Switches. Lock ON: There are NO provisions available, either factory or field modified, on ANY Series E or prior design series. There are provision ONLY to padlock the handle in the ON position provided on Series F Switches (field modification ONLY required). This will be subject to local code regulations - consult local authorities for interpretation. On Series F Switches, the lockplate on the side of the switch, next to the operating handle, will have a small center punch mark towards the top of the lockplate. This center punch mark, may be drilled out in the field to accommodate a padlock. NOTE: Drilling a hole in the painted steel lockplate, will expose unpainted steel, which should be treated(or touched up) with paint. Square D does offer the gray(ANSI 49) paint in a spray can, the catalog number is PK49SP.