Conduit Saddle
Brand Name: Clipsal
Type: Half
Nominal Size: 50 mm
Length: 85 mm
Height: 54 mm
Width: 39 mm
Hole Size: 7 mm
Clipsal Saddle Conduit Half 50Mm Zinc Plated - 180/50
Clipsal 180/50 Half Saddle, Conduit Clip, 50mm, Zinc Plated Steel
25 In Stock
Need more?
This item is currently available for backorder with an estimated arrival time of 2 days
Please note this ETA is provided to us by our suppliers and could potentially be delayed due to factors outside our control. If there are any delays we will contact you to keep you updated.
Price
$1.09 $0.99
Choose your style, Select your Switch and Checkout
We can customise your powerpoint to a range of colours and layouts, suited to your needs.
Clipsal Saddle Conduit Half 50Mm Zinc Plated - 180/50
Width 39
Height 50
Depth 85
| SKU | CLI180/50 |
|---|---|
| Supplier No | 180/50 |
| EAN / Barcode | 9311554038267 |
| Width | 39 |
| Height | 50.000000 |
| Length | 85.000000 |
| Width | 39.000000 |
| Brand | Clipsal |
| Nominal Size | 50mm |
| Hole Size | 7 mm |
0 of 0 Reviews
A FEW FAQS
No, they are only available in grey. This applies to the 280/16 (16mm), 280/20 (20mm), 280/25 (25mm), 280/32 (32mm), 280/40 (40mm) and 280/50 (50mm).
Issue: Parameter FbS (feedback scale factor) Product Line: ATV31 and ATV312 Environment: All models and serial numbers Cause: None Resolution: The parameter FbS is a parameter that can be used to scale the reference according to the range of the feedback sensor. Example: Regulating pressure PI reference range of process, 0-50 psi (0-100%) Range of pressure sensor, 0-100 psi FbS = Max sensor range / Max process range FbS = 100/50 = 2
The replacement for 15467 Power meter with 100/5 CTs is A9MEM3210 + 3 X METSECT5CC010 For more information see : https://eshop.schneider-electric.com/product.aspx?prod_id=A9MEM3210&org=21&lang=1&dist=276&tab=10&ses_id https://eshop.schneider-electric.com/product.aspx?org=21&lang=1&dist=276&prod_id=METSECT5CC010
The part number for a 50mm female and 50mm male bush is - 281/50 & 281F50 For further information , visit link below:- www.clipsal.com/Trade/search-results?q=281/50 https://www.clipsal.com/Trade/search-results?q=281F50
TRACE SW4024 shows Generator under/over speed error The Trace SW4024 120/60hz has a preset AC2 allowable frequency range from (53-67 hz) If there is a frequency out of that range you will get a generator under/over frequency. Solution: Service generator, replace bushings if applicable, and try to reduce max charge rate to see if the remedies the generator input.
Using parts 220S50-GY and 260/50-GY. Placethe 260/50 on the inside and the 220S50 on the out side place it in the hole and screw them together. This willl then seal the hole. For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=260/50 https://www.clipsal.com/Trade/Products/ProductDetail?catno=220S50
