No, they are only available in grey. This applies to the 280/16 (16mm), 280/20 (20mm), 280/25 (25mm), 280/32 (32mm), 280/40 (40mm) and 280/50 (50mm).

Issue: Parameter FbS (feedback scale factor) Product Line: ATV31 and ATV312 Environment: All models and serial numbers Cause: None Resolution: The parameter FbS is a parameter that can be used to scale the reference according to the range of the feedback sensor. Example: Regulating pressure PI reference range of process, 0-50 psi (0-100%) Range of pressure sensor, 0-100 psi FbS = Max sensor range / Max process range FbS = 100/50 = 2

The replacement for 15467 Power meter with 100/5 CTs is A9MEM3210 + 3 X METSECT5CC010 For more information see : https://eshop.schneider-electric.com/product.aspx?prod_id=A9MEM3210&org=21&lang=1&dist=276&tab=10&ses_id https://eshop.schneider-electric.com/product.aspx?org=21&lang=1&dist=276&prod_id=METSECT5CC010

The part number for a 50mm female and 50mm male bush is - 281/50 & 281F50 For further information , visit link below:- www.clipsal.com/Trade/search-results?q=281/50 https://www.clipsal.com/Trade/search-results?q=281F50

TRACE SW4024 shows Generator under/over speed error The Trace SW4024 120/60hz has a preset AC2 allowable frequency range from (53-67 hz) If there is a frequency out of that range you will get a generator under/over frequency. Solution: Service generator, replace bushings if applicable, and try to reduce max charge rate to see if the remedies the generator input.

Using parts 220S50-GY and 260/50-GY. Placethe 260/50 on the inside and the 220S50 on the out side place it in the hole and screw them together. This willl then seal the hole. For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=260/50 https://www.clipsal.com/Trade/Products/ProductDetail?catno=220S50