Clipsal Max 4 Link Bar Only 7Hole Neutral - L7P
Brass link bar, 100 A, 500 V, 7 hole
1 In Stock
Need more?
This item is currently available for backorder with an estimated arrival time of 2 days
Please note this ETA is provided to us by our suppliers and could potentially be delayed due to factors outside our control. If there are any delays we will contact you to keep you updated.
Price
$17.50 $15.91
Choose your style, Select your Switch and Checkout
We can customise your powerpoint to a range of colours and layouts, suited to your needs.
Clipsal Max 4 Link Bar Only 7Hole Neutral - L7P
Width 16
Height 13
Depth 57
| SKU | CLIL7P |
|---|---|
| Supplier No | L7P |
| EAN / Barcode | 9318793006712 |
| Standards | AS/NZS 4680 |
| Width | 40 |
| Height | 13.000000 |
| Length | 57.000000 |
| Width | 16.000000 |
| Brand | Clipsal |
| Range | Max4 |
Clipsal Max 4 Link Bar Only 7Hole Neutral - L7P
Get Max 4 your buck
Complete protection with high performance. With Clipsal Max 4 you will find a range of enclosures, switchboards, residual current devices, miniature circuit breakers, isolators, distribution boards, overvoltage protection and accessories.
0 of 0 Reviews
A FEW FAQS
no it is now discontinued LUP_ADAPTOR
The part name is 154/2
Issue: What is the difference between LA36400 and LA36400MB? Product Line: Molded Case Circuit Breakers Environment: Legacy LA, LAL, LH, LHL circuit breakers Resolution: The MB breaker has a shorter handle, so that it will not interfere with the door closing on a panel. Note: The MB suffix has a handle that is .325 inches shorter than the standard handle.
Issue: ATV18 driveset up for 2 wire control and low speed as speed reference. Product Line: ATV18, Altivar 18. Environment: All. Cause: Programming and setup. Resolution: 2 wire control for ATV18 drive will be between LI1 and +24V terminals. A maintained dry contact or a jumper can act as a run command. Low speed can be used to control the drive locally. The low speed parameter can be programmed by hitting down arrow key on the drive until LSP is shown. Once LSP shows up press data and use the up and down arrow keys to adjust setting. Once satisfied with speed press enter to save the setting.
Issue: Installation manual needed for an Altivar 61 Drive Product line: Altivar 61 Environment: All models, all serial numbers Cause Installation manual is not shipped with the drive. Resolution: There are two Installation manuals for the ATV61 drives, Low HP (up to 100HP) and High HP (above 100HP). The installation manual for the Altivar 61 drives up to and including 100 Horsepower can be found at this link: https://www.schneider-electric.us/en/download/document/1760643/ The installation manual for the Altivar 61 drives above 100 Horsepower can be found by following this link: https://www.schneider-electric.us/en/download/document/1760655/
Issue: Removal of bottom cover on ATV61 and ATV71. Product Line: Altivar ATV61 and ATV71 LHP units only or under 90KW Environment: All Cause: They can not get the the bottom cover off to check the power terminals. Resolution: 1st Turn off all power make sure the drive is not powered up and the DC bus is discharged before starting. You will need to turn the set screw counter clockwise on the control terminal pod. Next use a flat head screw drive to pry the corners on each side the cover to see if you can work it loose. Then pull down cover to remove it. This procedure is demonstrated in the video below:
