Clipsal - Cable Management Screw J Switch Mech Fixing - 31JSCREW

They come in bags of 100.

You can use a Clipsal 31JSCREW to secure the mech from behind. Screws are sold individually.

We have nothing specifically designed, but possible BSL with security screws (31JSCREWS)

All the products are Screw bolted, so customer can unscrew them and take it out. But we don't guarantee about the IP rating though and even needs to buy the blank escutcheen and do the cut out by himself.

Issue: The combination door handle on the AR3200 NetShelter Colocation enclosure needs to be replaced but the AR8132A doesn't fit. Product Line: NetShelter SX Colocation Environment: All versions and serial ranges. Cause: The hasp on AR8132A doesn't latch the NetShelter Colocation door correctly. Resolution: see below When replacing the combination lock handle of an AR3200 with an AR8132A you must reuse the hasp from the rear of the original AR3200 combination lock handle. Do not use the hasp that ships with the AR8132A, it will not work on the AR3200. Simply unscrew the hasp on the rear of the original AR3200 door handle and swap it for the hasp on the replacement AR8132A. After completing this swap and installing the replacement AR8132A you will be left with the original AR3200 door handle, and the hasp that came with the replacement AR8132A.

Issue: Removing the Front Cover to connect the Modbus Serial cable on the Altivar 600 Process Drive Product Line: Altivar 600 Process Drive Environment: All serial numbers for Altivar 600 Process Drive Cause: N/A Resolution: Procedure to remove the Front Cover of the Drive: 1) Unscrew the four screws attaching the front cover 2) Slide down the front cover 3) Remove the front cover 4) Plug the Modbus serial cable in the Modbus serial port