Size Ctn Qty Part Code 16mm 50 261/16 20mm 100 261/20 25mm 100 261/25 32mm 50 261/32 40mm 50 261/40 50mm 20 261/50

The 265 series is a range of IP56 rated insulated boxes suitable for numerous junctions and terminations. Each box is supplied with a 3mm sealing gasket. This applies to the 265/1, 265/3, 265/4, 265/5, 265/7 and 265/7D.

The dimensions of the 164/5 wall box are 234mm wide x 97mm high x 58mm deep. Some of the key features are: Fixed nut 5 gang Standard size for poured concrete For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=164/5

The part number for the wall box 164/5

Using parts 220S50-GY and 260/50-GY. Placethe 260/50 on the inside and the 220S50 on the out side place it in the hole and screw them together. This willl then seal the hole. For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=260/50 https://www.clipsal.com/Trade/Products/ProductDetail?catno=220S50

Issue: Logic and Control Voltage specifications for ATS22... S6/S6U Soft Starters. Product Line: Altistart ATS22 Environment: S6 S6U Cause: Control voltage and logic input max voltages allowed. Resolution: The S6 version was primarily designed for the European market and has control voltage range (for terminals CL1 and CL2) of 187V AC to 264.5V AC (220 -15% to 230 +15%)). The softstart then generates a 24VDC power supply (24VDC +/- 6 V) that is limited to 42 mA. This supply can be measured between terminals +24 and COM on the control terminal strip and should be present when the 220V power is supplied to the softstart. The S6U was designed and qualified for the standard NEMA range, which is: 103.5 ... 126.5V AC and is primarily used in the US. The allowed voltage on ATS22•••S6U control terminals (input CL1 and CL2) is from the range: 93.5V ... 126.5V, 50/60 Hz (110 -15% to 115 +10%)