Smoke Alarm
Brand Name: Clipsal
Type: Isolation
Range: 756 Series
Voltage: 250 V
Includes: Clipsal Smoke Detectors
Temperature Range: 0 to 50 deg C
Clipsal Smoke Alarm Isolation Unit - 756
Clipsal 756 Smoke Alarm Isolation Unit
Dispatch. 2 days
Need more?
This item is currently available for backorder with an estimated arrival time of 2 days
Please note this ETA is provided to us by our suppliers and could potentially be delayed due to factors outside our control. If there are any delays we will contact you to keep you updated.
Price
$170.12 $154.65
Choose your style, Select your Switch and Checkout
We can customise your powerpoint to a range of colours and layouts, suited to your needs.
Clipsal Smoke Alarm Isolation Unit - 756
Width 135
Height 50
Depth 208
| SKU | CLI756 |
|---|---|
| Supplier No | 756 |
| EAN / Barcode | 9311554132415 |
| Width | 135 |
| Height | 50.000000 |
| Length | 208.000000 |
| Width | 135.000000 |
| Brand | Clipsal |
| Range | Firetek Smoke Alarms |
| Voltage | 250 V |
Clipsal's Fire Tek range helps protect the most valuable assets; family, friends and the home.
They are backed by the SAI Global 5 ticks certification of quality, offering robust designs for reliability, ensuring early detection and warning from hazardous smoke and fire.
The Australian Building Code mandates all new homes must have AS3786:2014 compliant smoke alarms installed, interconnected and hard wired to mains power.
By having Fire Tek's smoke alarms installed, you will have the best chance of escaping the devastating effects of a house fire.
0 of 0 Reviews
A FEW FAQS
The 756 is a Smoke Alarm Isolation Unit compatible with Clipsal Smoke Detectors only. The unit provides a set of isolated, normally open (N.O.) and normally closed (N.C.), changeover contacts permitting auxiliary devices such as sirens, strobes and/or security systems to be activated when the new 755 Smoke Alarm is in the alarm state. The 756 may be used to provide connection of the 755 Smoke Alarm output to an external siren or strobe. It may also be used as an interface to Clipsal C-Bus®, Clipsal HomeSafe Security Systems, emergency lighting or other service. The 756 is capable of operating correctly in the absence of mains supply and derives its power from the smoke alarm only when the smoke alarm is in the alarm state.
Max of 40 smoke alarms can be connected to a single 756. This is the link to the page https://www.clipsal.com/Trade/Products/ProductDetail?CatNo=756 https://updates.clipsal.com/ClipsalOnline/Files/Brochures/A0000292.pdf Key Features Changeover Contacts: 1xNormally Open (N.O.), 1xNormally Closed (N.C.) Contact Rating: 10 A resistive and inductive, 250 V AC, 50 Hz Interconnection Input: 6 V to 10V DC. referenced to Neutral Supply Current: Alarm mode - 1mA minimum. Non-alarm mode (standby) Maximum number of smoke alarms interconnected to a single 756 Isolation Unit: 40 Switching Delay: 20 seconds Cables Accommodated: 2 x 2.5 mmsq
Yes, the new Gen 2 smoke alarms are 100% backwards compatible. They can clip straight onto the existing mounting bases. The new smoke alarms are also compatible with wired interconnection of all alarms mentioned above as well as the existing 756 isolated relay module.
Yes, if you have a 755PSMA2, you can use the 755RB Base which has a set of built in contacts or you can use a 756 Isolation unit which also carries out the same task.
Issue: Is the 9001KM38 a resistor type or full voltage type of light module? Product Line: Push Buttons and Operator Interface Environment: Harmony Pushbuttons Cause: Product Features Resolution: Both descriptions are accurate. They are both the same device but can be selected by either description depending on the application/preference.
Issue: M241 to communicate with a 1756 ControlLogix controller via Ethernet/IP Product Line: M241 Resolution: See attached pdf
