No, the O-ring is pre-lubricated. Using additional
lubricants could reduce the longevity of the O-ring
and void the warranty. Care should be taken during
copper tube insertion to ensure the O-ring does not
roll or dislodge.
Annealed (ANN), Bendable Quality (BQ) and Hard
Drawn (HD) Type A and B copper tube compliant to
AS1432.
The surface should be prepared in the same way as
you normally would with brand new pipe.
Standard ELSON Press Water fittings should not be
used for solar installations between the solar panel
and the tank. ELSON Press HT (solar) fittings are
recommended for applications above 95 Degrees.
Yes, but the tube and fittings must be protected
when installed in any corrosive and/or acidic
environments, this includes possible ground water
exposure, as per regulatory requirements.
ELSON Press Water fittings can be used for
compressed air (oil free) installations, ELSON Press
Water fittings can be used for compressed air
(with a small oil content) and on some oil lines.
Consultation with Elson on specific installation
requirements is highly recommended.
Water Press 20mm (3/4) No.12 45D Elbow F&F - 36331
General
