Water Press 15mm (1/2) No.12 90D Elbow Female - 36152

36152 - Elson Press Water DN15 No.12 90D Elbow F
132 In Stock
Need more?
ITEM (1 qty)
BOX (10 qty)
CARTON (500 qty)
Price
$2.87 $2.61
Break Pricing
  • 50 $2.43 $2.21
Same day dispatch ends in : mins
Your order will have with items each
  • Same Day Dispatch
    Order before midday
  • 60-Day Returns
    stress-free purchasing
  • Full Supplier Warranty
    backed up product quality

Water Press 15mm (1/2) No.12 90D Elbow Female - 36152

Water Press 15mm (1/2) No.12 90D Elbow Female - 36152
×
  • Water Press 15mm (1/2) No.12 90D Elbow Female - 36152
  • Water Press 15mm (1/2) No.12 90D Elbow Female - 36152
  1. Water Press 15mm (1/2) No.12 90D Elbow Female - 36152
  2. Water Press 15mm (1/2) No.12 90D Elbow Female - 36152
Specification
SKU9999309
Supplier No36152
BrandElson
MaterialCopper

Elson Press 90° Elbow, 15mm F & F Compression, Copper

  • Elson Press fittings are manufactured by ISO9001 accredited and certified factory (Elson established Australian owned company for over 25 years)
  • Comprehensive range for Water/Solar and Gas fittings 15mm – 100mm ( always expanding largest range in the Australian market)
  • Lead Free Brass Fittings
  • Leak before press O-ring (will leak if not pressed)
  • German certified material used to manufacture O-rings (highest quality material available)
  • Complete certified and tested tooling range available
  • Technical Manuals and product information
  • Nationwide after sales and technical support

A FEW FAQS

No, the O-ring is pre-lubricated. Using additional lubricants could reduce the longevity of the O-ring and void the warranty. Care should be taken during copper tube insertion to ensure the O-ring does not roll or dislodge.

Annealed (ANN), Bendable Quality (BQ) and Hard Drawn (HD) Type A and B copper tube compliant to AS1432.

The surface should be prepared in the same way as you normally would with brand new pipe.

Standard ELSON Press Water fittings should not be used for solar installations between the solar panel and the tank. ELSON Press HT (solar) fittings are recommended for applications above 95 Degrees.

Yes, but the tube and fittings must be protected when installed in any corrosive and/or acidic environments, this includes possible ground water exposure, as per regulatory requirements.

ELSON Press Water fittings can be used for compressed air (oil free) installations, ELSON Press Water fittings can be used for compressed air (with a small oil content) and on some oil lines. Consultation with Elson on specific installation requirements is highly recommended.