Issue: Programming NLD on ATV61 Product Line: ATV61 Environment: ALL ATV61 Drives Cause: Needs the NLD feature for the ATV61 drive? Resolution: The ATV61 has this feature in Menu 1.4 , under the Motor Control Type, select energy Savings ( NLD). The NOLD (no load) function: Reduces the voltage to the motor when selected for variable torque loads. A constant volts/Hz ratio is maintained during acceleration. The output voltage will then automatically adjust to meet the torque requirement of the load

The part number for the open close auxiliary to suit Acti 9 iLD RCCBs is - A9A26924 https://www.schneider-electric.com.au/en/search/a9a26924

The Closest alternative PM1200 is METSEPM2230 See link below for more details: https://www.se.com/au/en/product/METSEPM2230/easylogic-pm2230%2C-power-%26-energy-meter%2C-up-to-the-31st-harmonic%2C-lcd-display%2C-rs485%2C-class-0.5s/

Yes, however it only made as a specials item. For further information please visit https://www.clipsal.com/Trade/search-results?q=sc2025cover

Yes, there is a mounting block for the 40. The part number is 447. Some of the key features are: Moulded mounting blocks With metal inserts 3 mounting screw positions suits 40, 40D and switches with 115x48 mm flush plates and 98 mm mounting centres For further information please visithttps://www.clipsal.com/Trade/Products/ProductDetail?catno=447

Issue: Altivar 320 drive is showing SSF and the motor will not run. Product line: Altivar 320, Altivar Machine Environment: All model numbers, all serial numbers Cause: Torque Limitation Resolution: SSF means the drive has reach the Torque Limit fault setting. This parameter is not enabled by default on the drive. To disable go to CONF > FULL > FLT > TLD > SSD and change the setting to 'no'.