Clipsal Max 4 Link Active 6Hole - L6R

Mini Active link, 100 A, 500 V, 6 hole, with cover, front wiring, Red
0 In Stock
Need more?
ITEM (1 qty)
BOX ( qty)
CARTON ( qty)
Price
$12.97 $11.79

Clipsal Max 4 Link Active 6Hole - L6R is discontinued.

Your order will have with items each
  • Same Day Dispatch
    Order before midday
  • 60-Day Returns
    stress-free purchasing
  • Full Supplier Warranty
    backed up product quality

Clipsal Max 4 Link Active 6Hole - L6R

Clipsal Max 4 Link Active 6Hole - L6R
×
  • Clipsal Max 4 Link Active 6Hole - L6R
  • Clipsal Max 4 Link Active 6Hole - L6R
  1. Clipsal Max 4 Link Active 6Hole - L6R
  2. Clipsal Max 4 Link Active 6Hole - L6R
Width 70
Height 55
Depth 46
Specification
SKUCLIL6R
Supplier NoL6R
EAN / Barcode9318793006453
Width12
Height55.000000
Length46.000000
Width70.000000
BrandClipsal
RangeMax4
Voltage500 V
Clipsal Max 4 Link Active 6Hole - L6R

Get Max 4 your buck

Complete protection with high performance. With Clipsal Max 4 you will find a range of enclosures, switchboards, residual current devices, miniature circuit breakers, isolators, distribution boards, overvoltage protection and accessories.

A FEW FAQS

Issue: Can't find LFr parameter to control in keypad mode and has Altivar ATV16 with keypad VW3A16102. Product Line: ATV16 Environment: All Cause: No LFR parameter Resolution: The LFr parameter does not appear if the keypad part number VW3A16102 (which is required) datecode is before 9422.

The maximum DC voltage for TeSys F range contactors is 125 Volt per pole. This voltage is applicable for the specification of L/R <= 15ms in DC applications.

The maximum DC voltage for TeSys D range contactor is 75 Volt per pole. This voltage is applicable for the specification of L/R <= 15ms in DC applications.

When reading the value of LCR parameter using Modbus the scaling unit varies as follows: 0,01 for all sizes below or equal to 15KW 0,1A between 18,5 to 160KW 1A over 160KW

Issue: Altivar 28 start/stop/speed controlled via remote keypad. Product Line: Altivar 28 Environment: All Cause: N/A Resolution: Go to the I/O ( input / output ) menu and set LCC ( local control) to Yes which no allows acces to LFR ( local frequency) parameter for local speed adjustment. To change the reference setting you will need to go to the SET menu and change parameter LFR each time desire to change the speed the drive is commanded to run at..

Issue: ATS48 tripping on ULF or motor underload fault. Product Line: Altistart ATS48 Environment: All Cause: The soft starter is programmed for activation motor underload (ULL) in the Pr0 menu. The motor underload threshold parameter (LUL) is set to 60% and the drive is running only 58% or lower motor torque viewed in the SUP menu parameter (Ltr). Resolution: Troubleshooting: Check Motor underload threshold parameter (LUL) in menu PrO and compare it the motor torque parameter in the SUP menu. If your LUL parameter is set lower then the Ltr in the SUP then the soft starter will trip on ULF fault.