Unfortunately, No.C2000 series outlets need to be ordered separately. FPSS121 can only fit 1 x power and 1 x data outlet. For further information, please visit https://www.clipsal.com/Trade/search-results?q=FPSS121

Unfortunately, Part number FPSS121 is only available as single outlet.

Yes, however the initial transfer must take place serially using the Unitelway driver or direct transfer of the application to the PCMCIA memory card using a laptop computer with a PCMCIA slot. This is because the ModbusTCPIP protocol needs to be resident in the Magelis. Once the ModbusTCPIP protocol is resident in the Magelis, then transfer can be accomplished using the remote transfer option. The remote transfer option is located under the pull down menu for transfers then remote address. Legacy KB System (APS) Data: RESL121 V1.0, Originally authored by on , Last Edited by on Related ranges: Magelis XBT -H, XBT-P, XBT-E

Issue: Breakdown of components for 9001KYK117 Product Line: Harmony Push Buttons Environment: Harmony Control Stations Cause: Product Features Resolution: 9001KYK117 components are: 1-9001KY1S1 (red enclosure) 1-9001K15 (break glass operator) 1-9001KA1 (1 open and 1 closed contact) 1-9001KN799RP (legend plate) Replacement glass discs are 9001K57 (package of five)

Issue The purpose of this resolution is to provide Advantys STB users with the means to determine current requirements in their STB Island and help select which current sources are required. The goal is to help simplify power component selection for an Island. Product Line Advantys Resolution Bus current requirements of STB Island modules and bus current supplying module capabilities are listed in this document. There is also a field device load totalizer that may be used to determine the number of PDT modules required. After Island bus current requirements are totaled, If the NIM module bus current capability is exceeded, it may be augmented by the following current sources: End of Segment - Beginning of Segment combinations. These cable linked modules are used when Islands served by a single network communicating NIM are separated, or when additional bus current is required. The BoS module serves as a new source of bus current. A CPS2111 Auxiliary Power Supply can be added serially with I/O modules to extend the Island. Just as an Island requires a NIM plus one or more STBPDTxxxx modules to supply field power, these bus current sources must also be followed in an Island configuration by one or more of these power distribution modules (PDM). Legacy KB System (APS) Data: RESL168317 V3.0, Originally authored by WeDa on 03/31/2007, Last Edited by WeDa on 10/28/2008 Related ranges: Advantys STB