207M is a hot dip galvanized earth clip to suit 3/4" or 20mm conduit. For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=207M

The part number 209M is not available in Stainless.

203M. Pressed Metal Conduit Fittings, Earth Clips, Water pipe adjustable earth clip 15 - 20mm or 1/2 - 3/4 inch. Please see following link under the documentation tab for full catalogue. https://www.clipsal.com/Trade/Products/ProductDetail?catno=203M

Goals and Symptoms The following error message appears in PowerLogic SCADA (PLS) v7.10 after starting Runtime: Cannot Open Server <ServerName>. The port is in use or an attempt was made to access a socket in a way forbidden by its access permissions. As a result, the IO Server will not start. Causes and Fixes The default port used by the I/O Server is 2078. The above issue can be resolved by assigning a different port to the IO Server in the Servers > I/O Server field in the Project Editor. For a complete list of default ports used in PLS, refer to the System Integrator Manual (search for 'default port'). Here are a few: 2075 Reports server communications 2076 Alarm server communications 2077 Trends server communications 2078 Legacy I/O communications 2082 Publish subscribe I/O server communications To determine which ports are already in use, open a Command Prompt window and run the command 'netstat -a'. This will list all of the TCP port numbers currently in use in the system. For additional information, refer to RESL197082. Keywords: PLSCADA, PL SCADA, PowerSCADA, Power SCADA, StruxureWare PowerSCADA Expert, SPE 7.1, 7.2, 7.10, 7.20, net stat Legacy KB System (APS) Data: RESL209208 V1.0, Originally authored by AnVa on 09/27/2012, Last Edited by AnVa on 09/27/2012 Related ranges: PowerLogic SCADA 7.1, PowerSCADA Expert 7.2

The part number for a 20mm conduit cap is- 262/20

The part number for 20mm HFT corrugated conduitart is 9020CHF.