Residual Current Circuit Breaker
Brand Name: Clipsal
Type: Standard
Range: 4 Series
Voltage: 240 VAC
Current: 20 A
Interrupt Rating: 6 kA
Number of Poles: 2
Rated Fault Current: 30 mA
Curve Characterstic: C
Trip Range: 5 - 10 x In
Enclosure: IP20/IP40
Actuator: Non-Delayed
Length: 77.5 mm
Width: 36 mm
Height: 81 mm
Temperature Rating: -5 to 40 deg C
Environmental Conditions: 20000 Cycles of Mechanical
20000 Cycles of Electrical
Tightening Torque: 3.5 N/m
Clipsal MCB/RCD 2Mod 2P 20A 250V 30Ma 8Ka - RCBM220/30
From 1 May 2023, “Type AC” RCDs must not be installed in Australia. This change is due to the increased use of electronics, solar energy generation and other similar products with a high d.c waveform component.
This item is currently available for backorder with an estimated arrival time of 2 days
Please note this ETA is provided to us by our suppliers and could potentially be delayed due to factors outside our control. If there are any delays we will contact you to keep you updated.
Choose your style, Select your Switch and Checkout
We can customise your powerpoint to a range of colours and layouts, suited to your needs.
Clipsal MCB/RCD 2Mod 2P 20A 250V 30Ma 8Ka - RCBM220/30
SKU | CLIRCBM220/30 |
---|---|
Supplier No | RCBM220/30 |
EAN / Barcode | 9318795004617 |
Width | 40 |
Height | 80.000000 |
Length | 100.000000 |
Width | 42.000000 |
Brand | Clipsal |
Range | Resi MAX |
Number of Poles | 2 Pole |
Current Rating | 20 Amps |
Voltage | 240 VAC |
Get Max 4 your buck
Complete protection with high performance. With Clipsal Max 4 you will find a range of enclosures, switchboards, residual current devices, miniature circuit breakers, isolators, distribution boards, overvoltage protection and accessories.
A FEW FAQS
4RCBM220/30 will switch both active and neutral. For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?CatNo=4RCBM220/30
The RCBM210/30 is a combination RCD/MCB. For further information , visit link below:- https://www.clipsal.com/Trade/search-results?q=RCBM210/30
RCBM216/30 can be used with RMXPH105,RMXPH112 or RMXPH124.
Please refer to the attached literature for details.
Yes they are.
4RCBM220SI30 is the replacement for part number 4RCBM220G30. 4RCBM220SI30 is RCD/MCB, 2 module, 2 Pole, 20A, 30mA, 10KA, C-Curve SI-type, super immune, A-type, surge current protected to 3000 A 8/20ms. For further information, please refer to the below link: https://www.clipsal.com/Trade/Products/ProductDetail?catno=4RCBM220SI30