Cable clips 564M8 are only available in white... For further information

Product Line: Circuit Breakers Environment: Electrical Distribution Equipment Resolution: The settings are 30ma, 100ma, 300ma, 500ma, 1A, 3A, 5A, 10A, 30A.

Over the coming months, the terminal connectors supplied with a number of Electrical Accessories will be changing. These changes are: The screw type in the connector will suit either a No. 2 Philips Drive or a No 1 Square Drive screwdriver. Terminal connectors will now be square wrapper design, ensuring reliable connection. All connectors will now be supplied with single screw. This is fully compliant with AS/NZS3000:2007 as per clause (d) below from sub-section 2.9.4. for active, neutral and earth connections. (d) a neutral conductor used as a combined protective earthing and neutral (PEN) conductor for protective earthing of any portion of an electrical installation, the terminal shall be of a type having‰ÛÓ two screws; or one screw with an outside diameter not less than 80% of the tunnel diameter. The terminal connectors being supplied have a screw diameter in excess of 80% of the tunnel diameter which means the single screw connectors can be used for active, neutral and earth connections. The products supplied with new connectors are: 504/4 554/3 554/4 554J4 554C4 554J4B100 HD554J4

The part number 25644 replaced with A9F54110.

Part code is 25644

The wall box part number is 164/4