Main Connection Box
Brand Name: Clipsal
Type: Unfused
Material: Polyamide
Color: Black
Number of Terminals: 4
Conductor Size: 25 sq-mm
Connection Type: Dual Screw
Entry Size: 32 - 25 mm
Degree of Protection: IP30
Cover Attachment: Screwed
Number of Connection Clamps: 4
Number of Inlets: 4
Clipsal Mains Box 4 Term 32-25Mm Dual Screw Ent - 650/4-BK
Clipsal 650/4Bk Mains Box 4 Term 32-25Mm Dual Screw Ent
2 In Stock
Need more?
This item is currently not available for backorder.
We can notify you when it's available again by subscribing to the back in stock notification. Enter your email address and click submit to automatically receive an email when we get more in.
Price
$132.46 $120.42
Choose your style, Select your Switch and Checkout
We can customise your powerpoint to a range of colours and layouts, suited to your needs.
Clipsal Mains Box 4 Term 32-25Mm Dual Screw Ent - 650/4-BK
Width 76
Height 76
Depth 96
| SKU | CLI650/4BK |
|---|---|
| Supplier No | 650/4-BK |
| EAN / Barcode | 9318793009270 |
| Height | 76.000000 |
| Length | 96.000000 |
| Width | 76.000000 |
| Brand | Clipsal |
| Range | Cable Management |
| Material | Polyamide |
0 of 0 Reviews
A FEW FAQS
The part number 650/4 accommodates 16mm2 cable.
Yes. The cover for the 650/4AL-bk is a 650/4 COVER-BK
The part number for the shroud would be 650/2N-BK. Please see below link for more information on this product under the documentations tab. https://www.clipsal.com/Trade/Products/ProductDetail?catno=650/2N
Issue: There are side airflow devices other than the Cisco models noted for AR7715 and AR7725 that require a duct kit. Product Line: NetShelter SX Environment: All models and serial ranges. Cause: An installation may require a side airflow duct kit, and the equipment being instaled was not specifically designed for use with the AR7715 or AR7725. Resolution: The AR7715 and AR7725 Side Air Flow Duct Kits are designed specifically for use with Cisco's side airflow switches. AR7715 is designed to be used with Catalyst 6509, 6509E, 6513 and the MDS 9509 and 9513 Multilayer Directors. AR7725 is designed to be used with Nexus 7009. In general, when recommending a side airflow duct kit for equipment other than the Cisco products listed above we recommend using AR7725. The AR7725 is not as tall as AR7715 and it does not have a mounting rail required for the equipment, as the AR7715 does. To insure proper operation the airflow path should be similar to the Cisco models with similar chassis dimensions: 14U x 17.3" W x 24" D. Installing equipment that's not as tall or deep may result in the need of foam and/or duct tape to close off open spaces between the equipment and the duct. The AR7715 can also be used with other Cisco 6500 series (such as a 6506) and 9500 series switches, but all components of the kit will not be used. The rear baffle connecting the top and bottom duct cannot be installed without field modification, because the other switches in this family are smaller. This is not a concern, since the smaller switches also have significantly lower airflow requirements. The top and bottom duct alone will supply the smaller switches with sufficient airflow. The height of the AR7715 is adjustable from 24.49" to 33.35". If you have any further questions or inquiries please contact Schneider Electric, ITB Technical Support.
The replacement for part number is a 9f54420.
Replaced with part no 6500ADS for more information on this part please refer to https://www.clipsal.com/Trade/Products/ProductDetail?catno=6500ADS
