No. Unfortunately, the 260/25 is only available in Grey.

The standard pack size of the 262/25 is 50 Some of the key features are: Rigid Tube For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=262/25

The 261E25 has a height of 18mm. For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=261E25

The part numbers are 261/25 for the saddles and 261S25 for the spacers. Some of the key features are: 63mm Length x 20mm Width x 29mm Overall Height 48mm Mounting Centre For further information please visit https://www.clipsal.com/Trade/search-results?q=261/25

Slip Type Expansion Couplings are available from 16mm through to 50mm.The part numbers of slip type expansion coupling are as follows: 16mm = 251/16 20mm = 251/20 * 25mm = 251/25 * 32mm = 251/32 40mm = 251/40 * * = only available in Grey Where long conduit runs are likely to be exposed to wide variations in temperature, it is recommended that expansion couplings be used at each join. It is not recommended that Slip Type Expansion Couplings be used where the conduit run is exposed to the weather. Standard colour is Grey (GY). Dimension details are attached.

The dimensions for a 261S Saddle Spacer are 261S are: Saddle Spacers Catalogue Number Size Length (L) Width (W) Centres (CRS.) Standoff (T) Height (H) 261S16 16mm 55mm 21mm 32mm 8mm 14mm 261S20 20mm 61mm 22mm 40mm 8mm 14mm 261S25 25mm 74mm 26mm 48mm 8mm 14mm Saddles Spacers set a conduit run off the wall 8mm to allow easier cleaning and repainting and to facilitate entry into equipment. They are available in sizes 16mm through 25mm. Standard colour is Grey (GY), with Orange (EO) also available at extra cost. For further information please visit www.clipsal.com/Trade/search-results?q=261S