Part no for extension ring to suit 93 is 93ER

Issue: ATV61 Apogee FLN P1. Where do I determine drive fault status? Product Line: Altivar Machines, Altivar 61 with VW3A3314 installed Environment: All models with VW3A3314 Cause: Customer is unsure what object to monitor over the network to determine if the drive is in a faulted condition. Resolution: Bit 3 of Object 93 is used to indicate the ETA status of the drive. Monitor bit 3 of object 93 to determine if the drive is or is not in a faulted state.

The part number for the mechanism is WSW116/TW-GY Some of they key features are: 1 gang One way American style Indirect mounting Size: 93 mm Length X 35 mm Width X 32 mm Depth, 84 mm mounting centre For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=WSW116

The part number for 1 pole, 80A isolator is MSW180. MSW180 Isolator Switch, 1 Pole, 1 Module, 10KA, 80A Clipsal offers an extensive range of high quality mains switches for residential commercial and industrial applications, The main switches incorporate superior quality internal mechanisms and come with a highly visible ON/OFF toggle, which allows for quick location when isolation of power is required in an emergency Edition 93 Trade Product Guide Page # 176 Key Features Cable automatically guided to the correct position: terminals with guard Insulated terminals - IP20 Downstream by biconnect comb busbar, except 100 A version Downstream/upstream by tunnel terminals Manual control on front face by O-I lever For further information see: https://www.clipsal.com/Trade/Products/ProductDetail?catno=MSW180

Issue: Enabling Telnet on a version 2 or 3 NetBotz appliance Product Line: NetBotz v3 Wall Appliance: 355/356 (NBWL0355/6) & 455/456 (NBWL0455/6) NetBotz v3 Rack Appliance: 450/451 (NBRK0450/1), 550 (NBRK0550), & 570 (NBRK0570) Environment: NetBotz 300-500 Series (all versions) Cause: Alternate configurations Resolution: Telnet is disabled on a Version 2 and 3 NetBotz Appliances by default, and in order to turn it on use the following procedure. To enable telnet temporarily, simply type in the following URL in a web browser: https://ip-of-appliance/enabletelnet To disable telnet, simply type in the following URL in a web browser: https://ip-of-appliance/disabletelnet Upon reboot, the appliance will disable telnet again, in other words, it`s not a persistent setting.

The part number for the switch mechanism to suit the 10A, 240V, socket outlet is WSW116. Some of its key features are: 1 gang One way American style Indirect mounting Size: 93 mm Length X 35 mm Width X 32 mm Depth, 84 mm mounting centre For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?CatNo=WSW116