Gas Press 15mm (1/2) X1/2Male X 75mm No.19Bp Elbow - 35378

Gas Press 15mm (1/2) X1/2Male X 75mm No.19Bp Elbow - 35378

Price
$16.96 $15.42
In Stock
35378
Elson 35378 - Elson Press Gas DN15X1/2"MI X 75Mm No.19Bp Elbow
Gas Press 15mm (1/2) X1/2Male  X 75mm  No.19Bp Elbow - 35378
  • Gas Press 15mm (1/2) X1/2Male  X 75mm  No.19Bp Elbow - 35378
  • Gas Press 15mm (1/2) X1/2Male  X 75mm  No.19Bp Elbow - 35378
×
  • Gas Press 15mm (1/2) X1/2Male  X 75mm  No.19Bp Elbow - 35378
  • Gas Press 15mm (1/2) X1/2Male  X 75mm  No.19Bp Elbow - 35378
  1. Gas Press 15mm (1/2) X1/2Male  X 75mm  No.19Bp Elbow - 35378
  2. Gas Press 15mm (1/2) X1/2Male  X 75mm  No.19Bp Elbow - 35378
Full Box 5
Full Carton 120
Full Pallet -

Specification
SKU9999760
Domestic User25 Years
Commercial Use25 Years
Waranty MethodPart replacement, Return to Direct Wholesale
BrandElson
Supplier No35378
ApplicationGAS
End ConnectionFemale Compression, BSP Thread
Item NameElson Press Wall Elbow
MaterialCopper
Nominal Size15mm
Pressure Rating1600kPa
Size15mm
StandardsAS3688:2016
Temperature Rating100 deg C
TypeWall Elbow (type)

Elson Press Wall Gas Elbow 90°, 15mm Press x 15mm Male BSP Thread 75mm Long

  • Elson Press fittings are manufactured by ISO9001 accredited and certified factory (Elson established Australian owned company for over 25 years)
  • Comprehensive range for Water/Solar and Gas fittings 15mm – 100mm ( always expanding largest range in the Australian market)
  • Lead Free Brass Fittings
  • Leak before press O-ring (will leak if not pressed)
  • German certified material used to manufacture O-rings (highest quality material available)
  • Complete certified and tested tooling range available
  • Technical Manuals and product information
  • Nationwide after sales and technical support

FAQ

No, the O-ring is pre-lubricated. Using additional lubricants could reduce the longevity of the O-ring and void the warranty. Care should be taken during copper tube insertion to ensure the O-ring does not roll or dislodge.

Annealed (ANN), Bendable Quality (BQ) and Hard Drawn (HD) Type A and B copper tube compliant to AS1432.

The surface should be prepared in the same way as you normally would with brand new pipe.

Standard ELSON Press Water fittings should not be used for solar installations between the solar panel and the tank. ELSON Press HT (solar) fittings are recommended for applications above 95 Degrees.

Yes, but the tube and fittings must be protected when installed in any corrosive and/or acidic environments, this includes possible ground water exposure, as per regulatory requirements.

ELSON Press Water fittings can be used for compressed air (oil free) installations, ELSON Press Water fittings can be used for compressed air (with a small oil content) and on some oil lines. Consultation with Elson on specific installation requirements is highly recommended.